Easer E10 S

Mobile raiseboring machine suitable for conventional raiseboring, boxhole drilling as well as production drilling in drill-and-blast operations in medium to large size drifts

Versatility

Productivity

Accuracy

Easer E10 S in underground mine with pipe rack in underground mine

Easer E10 S

Mobile raiseboring machine suitable for conventional raiseboring, boxhole drilling as well as production drilling in drill-and-blast operations in medium to large size drifts

Versatility

Productivity

Accuracy

Easer E10 S

Mobile raiseboring machine suitable for conventional raiseboring, boxhole drilling as well as production drilling in drill-and-blast operations in medium to large size drifts

Versatility

Productivity

Accuracy

Easer E10 S in underground mine with pipe rack in underground mine

enabling both upward and downward drilling operations without the need for a concrete platform, adapting easily to diverse site requirements

driven by large-diameter drill holes that reduce the risk of ground “freezing”, ensuring uninterrupted and efficient excavation

achieved with mechanical rock excavation, delivering less than 1% hole deviation for precise and reliable results

Female operator in underground mine, controlling crane on Easer E10 S via teleremote

Designed to drill opening holes as a part of production drilling operations in block cave, sublevel caving and sublevel stoping mines, this versatile raiseboring rig can also be used for precondition holes, pastefill tube holes and media holes

Operator holding levers on control panel in cabin of Easer E10 S raiseboring machine

2-lever RCS control panel for operator comfort

Crane remote control for Easer E10 S in underground mine

Clear, ergonomic and intuituve lever layout for radio remote control

Female operator controlling crane on Easer E10 S via teleremote in underground mine

Wireless pipe handling control panel for improved operator safety

Easer E10 S drilling in underground mine

Increased productivity thanks to quick setup time - be up and running in under 30 minutes

As easy as that!

The name Easer is derived from the expression “ease off”, meaning to take off or release pressure, which is used in reference to the blast hole into which rock expands during blasting

Watch full video

The mobile, versatile and productive raiseboring rig

Easer E10 S works in drifts from 5x5 to 6x6 m. When drilling with a 750 mm diameter reamer, the Easer E10 S can drill conventional holes up to 200 m and boxholes and downreaming holes up to 60 m. This raiseboring machine has the capability to drill angled holes in any direction with a minimum range of 90°–60° from horizontal.

Safety

Easer E10 S is designed to keep a high level of safety. One example is the radio remote crane installed to handle drill pipes. No manual labor is required with the drill pipes, stabilizers or the reamer. All moving and lifting is done with the crane within an area of 4 meters radius.

Rig Control System (RCS)

As early as 1998, Epiroc introduced its Rig Control System (RCS) – a computerized control system for drilling rigs that stunned the market. Several thousands of RCS rigs are currently in operation the world over. Long experience and an ongoing dialogue with customers have resulted in increasingly sophisticated functions – with expertise that makes Epiroc uniquely qualified to drive development in the industry.

Versatility

No site preparation is necessary, and all equipment except the drill rods, are part of the carrier. In addition, and most importantly, Easer E10 S is wheel-bound, making it exceptionally easy to move to wherever it is needed in the mine.

Optional battery-electric driveline

Our range of battery-electric vehicles is designed to offer the highest safety and productivity with reduced service and maintenance requirements. Built to match, and even exceed, the performance of traditional equipment while also eliminating CO2 emissions during operation.

The Easer E10 SG, where the model name distinguishes battery-electric driveline, features both Epiroc's Rig Control System and exhaust-free technologies.

Downloads

Easer E10 S raiseboring rig, left front view.

Easer E10 S raiseboring rig, left front view.

Easer E10 S raiseboring rig, left front view.

Integrated muck chute

Hydraulic wrenching system

Remote controlled crane for easy pipe handling

Easer E10 S raiseboring rig, left rear view.

Easer E10 S raiseboring rig, left rear view.

Easer E10 S raiseboring rig, left rear view.

Mine adapted carrier with articulated steering, four wheel drive and low emission turbo charged diesel engine

Optional battery-electric driveline

Related products and services

Raiseboring equipment

The Epiroc range of Robbins raiseboring machines includes models for raiseboring, boxhole boring, and down reaming.

Raiseboring tools

We are the industry leader in raise boring rock drilling tools with a rich history of providing high quality products to drill raises in rock up to 8 meter diameters.

Epiroc - Robbins 74 S web reference photo

Robbins 74 S

The Robbins 74 S is a mid-sized raiseboring machine, drilling holes up to 4.5 meters in diameter and is reliable in a variety of applications.

Robbins 91RH, freecut

Robbins 92R

Raiseboring machine for holes ranging from 2.4 to 6.0 m in diameter.

Woman and man in high visibility clothes working by computer

Fleet+